Wednesday, April 5, 2023

Turned Beiderwand Threading Weaves a Lot of Structures!

 It turns out that a turned beiderwand threading will give you lots of options.  You can do turned summer and winter and its variations and double weave on your beiderwand warp.  And, you can also change the ratios of pattern to tie downs by changing your tie ups.  Here are a few more photos of some of the variations Karen's students woven in the workshop and also several links that may be of interest to our readers.

https://chgweavers.org/turned-beiderwand-with-karen-donde/ 

https://www.weaversguildmn.org/news/learning-turned-biederwand 

https://karendondehandwovens.com/home.html

 


Shelley woven this turned extended summer and winter sample on her warp

 

 

 

 

 

 

 

 

 

 

 


 This is Suzanne's turned summer & winter.

 

 

 

 

 

 


 Diane's turned summer & winter with a 60/2 silk weft

 

 

 

 

 

 

 


 Maggie did a double weave sample on her warp.

Wednesday, March 29, 2023

Turned Beiderwand Workshop Photos


 Here is a collection of photos from the Turned Beiderwand Workshop given to Reno Fiber Guild members by Karen Donde.  Each weaver is represented by their first name only to protect their privacy.

Turned Beiderwand Ratio 1:3 woven by Deb


 

Turned Beiderwand Ratio 1:2 woven by Diane


Turned Beiderwand Ratio 1:2 woven by Joan



Turned Beiderwand Ratio 1:3 woven by Karen

Turned Beiderwand Ratio 1:3 woven by Kathy

 

Turned Beiderwand Ratio 1:4 Woven by Maggie

More photos in the next post .

Tuesday, March 28, 2023

Turned Beiderwand Workshop with Karen Donde

 

 

This is a solution from Karen Donde's workshop on how to control a second warp. This shows the second warp going over the raddle and weighted separately  in sections with water bottles.


Note - This article was written by Suzanne W. of Reno Fiber Guild.  The photos from the workshop will be posted in Part 2 on this blog.  You will read about how each weaver handled the two warps that were required to weave Turned Beiderwand and other turned tied weaves possible on the same threading in this workshop.  Warping was probably the most difficult aspect of the whole workshop.  TBW will be the abbreviation for Turned Beiderwand in this article.


Turned Beiderwand with Karen Donde was an excellent weaving workshop.  Karen taught us so much more than what the TBW structure is.  She taught and demonstrated how versatile the TBW threading was by altering either the tie-up and/or the treadling, we were able to weave a myriad of other structures.  Given the time and inclination, one could get lost in that rabbit hole in a very long time!    


Several things that I (Suzanne) especially liked about the workshop was:
We learned that TBW is a unit weave.  I love unit weaves for their design capabilities as you can hop to any block to create a design vs. following a prescribed progression to avoid exceedingly long floats in your warp.  Note: Since the BW draft is turned, all floats are in the warp.  


We learned to read and understand our drafts in relation to blocks.  With 8 shafts, you have 3 pattern blocks available.  Each pattern block requires two shafts.  The ground warp ends are threaded on shafts 1 and 2, leaving shafts 3-8 for pattern blocks.  Easy Peasy… keeping track of treadling and designing as its all “tied” to your blocks!  


We learned about Ratios and how to adjust them.  Yes, traditional TBW had long warp floats: but, we learned multiple ways to shorten those floats for a choice of purpose and fabrics.  Example with a 1:4 Ratio you’ll end up with a 9-end warp float, but the floats alternate between the two pattern shafts so that you have a tie-down (ground warp) every 5th pick.  Consequently, those long ends are densely set and staggered - not all hanging loosely to get snagged. As for a serviceable fabric, again that depends on your objective and the fibers used.  My ground warp is 20/2 Tencel and my pattern warp is 10/2 Tencel, both are sett at 30 epi.  With a 20/2 weft, my fabric has a very nice hand and is plenty stable for a scarf.  In short, ratio = # of tie-down threads to the number of pattern pics! 

 
Because this was a Zoom 3-Day Workshop vs. an in-person workshop, during our break on our last day we held a round-robin discussion about what looms we used, fiber, warping method, problems and tips.   Note:  Most of us with floor jack looms (raising shafts) had to weave everything upside down as more shafts were going up vs. staying down.  Those with Dobby or Sinking Shed looms were seeing the right-side of their fabric as they wove.  The rest of us didn’t see that front side until it was off the loom!  


Diane – 8-Shaft David with a sinking shed. She wove her fabric RIGHT side up! Fiber 20/2 ground Tencel and doubled 20/2 tencel for pattern.  Both warps wound unto back beam w/o any issue.  Pattern warp tension holding fine as of the last woven sample.  The consensus was that  sinking shed looms have less issue with displacing the tension on the pattern warp.

 
Joan – 8-Shaft David with a sinking shed & 2 back beams! Warps 10/2 and 5/2 and an exploration of color with yarns in stash!


Irene – Louet Spring w/2 back beams.  Warps 8/2 tencel and 10/2 cotton.  Had a mis-threaded section and thought she’d threaded wrong as was getting such long floats!  She cut off, fixed the mis-threading to start again.  Mystery problem w/loom when trying to advance warp. 


Kathy – AVL Home Loom with 2 back beams. 10/2 Cotton and 8/2 Tencel.  No problems to report!


Teddie – Baby Wolf 1 back beam with both warps wound unto back beam.  Had a minor issue with separating the two warps to put in a weighted dowel, but then okay.  10/2 Tencel and 8/2 Tencel.


Maggie – Baby Wolf 1 back beam.  Had tension issues at the start.  Stopped and re-tied on.  10/2 Cotton and 5/2 Cotton.


Karen – Aristat Leclerc/1 back beam. Didn’t report any tension issues.  10/2 ground and 8/2 cotton.  


Betsy – Baby Wolf 1 back beam.  Followed Karen’s video to the “T”! Her pattern warp was NOT wound unto the back beam but weighted in sections with S-hooks and filled water bottles.  No tension issues!   10/2 Cotton for both warps.


Sharlet – Fireside 2 back beams.  Because of the loom design, it was difficult to hang separate sets of lease sticks to see to thread!  10/2 cotton for both warps.  See Sharlet’s use of Kumi plastic bobbins for missing warp ends!  Holes in the bobbins make it easy to attach weights.


Shelley – Mighty Wolf 1 back beam.  Followed Karen’s video to the “T” and even left in the raddle on the back which helped with the tension of her pattern warp.  Note: The raddle was raised above the ground warp.  All was great!   10/2 and 5/2 yarns.  


Deb – Table Loom- 2 back beams.  10/2 cotton and 5/2 cotton.  No issue with tension.

  
Suzanne – Baby Wolf 1 back beam.  Wound both warps with 1/1 cross unto beam.  Separated warps with weighted dowel after 1st yard to keep tension on pattern warp.  The only pesky issue was advancing the warps once weighted.  To advance, I needed to un-weight, advance, and then re-weight.  But then the AVL double-back beam required getting up and down to adjust.  20/2 Tencel and 10/2 Tencel.  I will definitely have more JOY weaving future TBW’s on the AVL so that I can see the face of the fabric while weaving vs. the back!  


In the next blog post, you will see multiple versions of the following structures: Turned Biederwand, Turned Extended Summer & Winter, Turned Summer & Winter, Turned Even and Uneven Tied Overshot, Turned Half Dukagang, Turned Paired-Tie Weave, Doubleweaves, and lastly Double 2-Tie Units.  Everyone's 
favorite look for the contrast, texture and sharpness in the design was Turned Half Dukagang, but not the easiest to treadle  and is why the samples are so short!

 Keep in mind that everyone received a different draft and used recommend setts for yarns in their stash.  The overall favored structure for its durability was the summer and winters as it had the least floats and the cleanest lines.  Another favorite for its textural contrast and sharpness of design was the Turned Half Dukagang. Very pretty but not the quickest to treadle; hence, the shorter samples!   Photos, which will be shared in the next blog post, are from the group as they posted into Padlet. 

Sunday, November 6, 2022

Color us Blue!

Mary and Polly holding up Polly's grand piece that was resisted around a piece of pipe.

 Every so often, Reno Fiber Guild has a dyeing day.  This year the program committee decided on a resist day, in which interested members learned how to resist the items they wanted to dye and the follow up day in which we had four indigo vats at our disposal so that the indigo could work its magic for us.  

Jen generously offered her garage for the event.  She and Suzanne made two 1-2-3 vats using fructose as the reducing sugar, Karen made a banana vat with the pulp of bananas as the reducing sugar and Beryl stirred together a pre-reduced indigo with a couple of chemicals for the "easy" solution!

The weather wasn't too cold so that made the indigo vats happy and also the dyers.    Karen and Beryl took photos of some of the amazing items that emerged  from vats like butterflies from cocoons.  It was simply a wonderful day.  Thanks to everyone who made it possible.

Maryln with one of her scarves.  This was wrapped on a piece of PVC pipe.

Paulie holding up her prize after removing the resist bands


Suzanne hanging out at a 1-2-3 vat

Tanya brought handwoven shibori scarves.  The photo below shows the results after the resist threads were pulled out and she rinsed the scarves.


Wednesday, July 20, 2022

Wide Variety of Fabrics from the loom

Anni B. is interested in weaving for clothing.  Recently she put on a long warp and wove it off in a variety of  different fabrics, all in the same colorways, so that she could combine them in garments.  The yardage in the photo to the left might be a top or skirt.  Anni hasn't decided yet.


The photo below shows off the different sides of another piece of yardage.  This could be a lovely way to have a jacket with one side of the fabric showing and make the lapels with the reverse side showing.  Hopefully, Anni will have something sewn soon so we can feature her garments in another post.

 


A brand new member, Zoi, joined us for her first Sage Weavers meeting and brought som stunning pieces for our show and tell.  The photo below is a baby blanket woven from instructions in a book by Tom Knisely.  Zoi hand dyed the yarns for this piece and you can see how the colors change across the piece.  She gave one similar blanket to her grandson - what a lovely give for him to keep and treasure.



Zoi also brought this overshot scarf that she wove.  I believe that the white patterning is done with wool and it fulled gently when she wet finished it.  A lovely piece which will be a joy to wear on a winter morning.

Friday, July 15, 2022

Deflected Double Weave from an Online Class

 In February or March, Reno Fiber Guild had Denise Kovnat lead a class in Deflected Double Weave for Collapse Fabrics.    This was an online class that was spread over more than a week.  The participants had ample time to work on many different samples using a large variety of different kinds of threads.  It was a blast, expecially when we wet finished our pieces and could see how the weave structure deflected and distorted the surface of the fabric.  Work from that class is still being presented at Sage Weavers and we had two lovely pieces at our last meeting.  


Nancy S. brought this intriguing four shaft sample.  In the class, Denise had given us instructions on how to weave two separate layers and explained how this might be used in a scarf - a gap in the fabric so that one end could be inserted through the scarf.  Nancy didn't have enough warp left for a full scarf, but she did weave the layers and finished the sample with a twisted fringe.  The colors are glorious and this would make a scarf that would be noticed!



Susan M. wove a sampler that turned into a full length scarf.  She used wool in some of her wefts so that it would partially felt during the wet finishing.  She also added an exciting button  and kumihimo loop to fasten the edges of the scarf when worn.  


Susan (photo to the right) wore a top that she wove and Jill A. sewed for her.  Not sure if this is deflected double weave or not, but it certainly is striking.

Thursday, July 14, 2022

We Love Overshot!

  Kathy R. brought this lovely towel /mat to Sage Weavers.  She used two painted warps (Easter eggs and Blue opal) purchased from Kathrin Weber and used an overshot pattern from a recent Handwoven magazine. These towels must have been fun to weave with all the color changes in the warp - and will be especially fun to use.





The photo below is a napkin, also woven by Kathy R.  She used a gradient in the warp and a fine cotton warp and weft for an elegant piece.  The technique was learned in a class with Tien Chiu.


The next towels were woven by Michelle L., also in overshot.  The pattern comes from Carol Strickler's book #416. Beautiful work, Michelle.